Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Jul 2018
    Location
    Shanghai
    Posts
    3
    Post Thanks / Like

    The inkjet printer does not recognize the cause and solution of the cartridge

    Inkjet printer to use a long time, there will be a printer cartridge can not identify the problem, there is such a situation do not panic, mainly due to the following two reasons:
    1, the printer waste ink tank full
    Each inkjet printer has a fixed accessory life setting, when some accessories to reach the service life, the printer will be prompted to print. As the continuous use of the ink system is likely to cause waste ink, it is easy to lead to waste ink tank full. This can be done in two ways: use the clear software to print the motherboard to clear the reset, in order to eliminate the printer settings; or you can go to the maintenance point to replace the sponge in the waste ink warehouse. It is advisable for the user to use the latter, since simply clearing the stack easily leads to waste ink to burn the printer.
    2, bad ink cartridge identification chip or printer can not identify the chip
    This situation does not have much to do with the system and printer driver settings. If you use a compatible ink cartridge or chip decoder to decode the original ink cartridges, because some compatible supplies manufacturers produced by the chip quality is not stable or decoding prone to error, so often lead to the printer can not identify the cartridge. If you are using the original ink cartridges, please check the ink cartridge and printer contact points between the existence of oxidation or contamination of impurities such as ink, with alcohol after cleaning can generally return to normal. If the printer is used for a long time, there may be contact point breakage, loss of elasticity and other issues, encounter this situation, can only move the printer to replace the electric shock terminal parts.
    TK-6325,6326,6327,6329 for use in kyocera taskalfa 4002i,5002i,6002i

  2. #2
    Junior Member
    Join Date
    Jan 2019
    Posts
    3
    Post Thanks / Like
    There is no simple answer to this...there can be many causes. It can get triggered by just about anything from cartridge declared empty by the printer to outdated or faulty chip, missing or incorrectly installed (not clicked in properly) cartridge, ink on the chip or printer contacts. It can also indicate some hardware fault with the printer itself.

    Note: It's perfectly normal to see 'Ink cartridges not recognised' error with almost empty/empty Epson ink cartridges.
    Last edited by Webmaster; 09-04-2019 at 12:29 PM. Reason: Admin removed continuous underline.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •